To process your pricing enquiries and orders as smoothly as possible, we will require a door schedule including the following information as applicable:
| ESTIMATING | ORDERING | |
|---|---|---|
| DOOR TYPE & PERFORMANCE | - | - |
| Door type (e.g. DT01) | ✔ | ✔ |
| Fire rating (e.g. FD30S) | ✔ | ✔ |
| Is third party certification required? | ✘ | ✔ |
| Doorset configuration (e.g. SADD) | ✔ | ✔ |
| Door handing (e.g. LH) | ✘ | ✔ |
| FRAME DETAILS | - | - |
| Frame type (e.g. A) | ✔ | ✔ |
| Frame finish (e.g. Acrovyn Pebblette Texture) | ✔ | ✔ |
| Frame colour (e.g. 162 Charcoal) | ✘ | ✔ |
| Frame dimensions (structural opening to ffl or frame opening to ffl) | ✔ | ✔** |
| DOOR DETAILS | - | - |
| Door dimensions (leaf height, width & thickness, and other panel dimensions if required)* | ✔ | ✔** |
| Door finish (e.g. Acrovyn Pebblette Texture) | ✔ | ✔ |
| Door finish colour (e.g. 112 Pacific Blue) | ✘ | ✔ |
| VISION PANELS | - | - |
| Vision panel configurations (e.g. VP1) | ✔ | ✔ |
| Vision panel dimensions (height, width & location) | ✔ | ✔ |
| Bead type (e.g. BT01) | ✔ | ✔ |
| Bead finish/colour (e.g. Acrovyn, 24 Dove) | ✔ | ✔ |
| FIRE & COLD SMOKE SEALS | - | - |
| Seal colour (e.g. White) | ✘ | ✔ |
| Cold smoke seal type, if applicable *** | ✘ | ✔ |
| IRONMONGERY | - | - |
| Hinge type (e.g. Hinge 01) | ✔ | ✔ |
| Hinge number per door leaf | ✔ | ✔ |
| Hinge positions | ✘ | ✔ |
| ADDITIONAL INFORMATION | - | - |
| Specialist application requirements (e.g. X-ray areas, wet areas) | ✔ | ✔ |
| Is FSC chain of custody certification required? | ✘ | ✔ |
* If frame dimensions have already been provided, door leaf sizes are not necessary.
Please note the maximum fully encapsulated (DT02) 44mm thick door leaf size we can manufacture is 2800mm x 1200mm. Wider leaf sizes could potentially be achieved for door cladding configurations incorporating CS Acrovyn Door Edge Protectors.
This is subject to compatability with fire test evidence for the specified configuration and some colour limitations. Please contact us to discuss your specific requirements.
** We reserve the right to re-quote in case of discrepancies in sizes provided for estimating and manufacturing.
*** Unless otherwise specified, brush cold smoke seals will be supplied with FD30S and FD60S doorsets as standard.